PARAMMachine parameter · TIME CONST. (N)
N30-N35
Cutting feed time constant for time constant changeover M-code command N30: for M881 command N31: for M882 command N32: for M883 command N33: for M884 command N34: for M885 command N35: for M886 command
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Cutting feed time constant for time constant changeover M-code command N30: for M881 command N31: for M882 command N32: for M883 command N33: for M884 command N34: for M885 command N35: for M886 command
Set the cutting feed time constant for a time constant changeover M-code command. N30 to N35 N30 to N35
Setting
Setting range0 to 1800
Unitms
Program typeM, E
Takes effectAfter stop of movement
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 530. Reference and explanation only — not a reproduction of the manual.