What is the setting range of Mazak parameter N36?

–32768 to 32767. A changed value takes effect: At power on.

PARAMMachine parameter · TIME CONST. (N)

N36

Multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio

Q: What does Mazak parameter N36 do?

N36 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio. If the actual ball screw pitch is a decimal fraction (special gear ratio) with the machine of absolute position specification, input the number of rotations of the ball screw per rotation of the rotary axis (360 degrees/ actual ball screw pitch).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

If the actual ball screw pitch is a decimal fraction (special gear ratio) with the machine of absolute position specification, input the number of rotations of the ball screw per rotation of the rotary axis (360 degrees/ actual ball screw pitch).

Setting

Setting range–32768 to 32767

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 82, 530. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →