What is the setting range of Mazak parameter N37?

–32768 to 32767. A changed value takes effect: At power on.

PARAMMachine parameter · TIME CONST. (N)

N37

Rotational speed after multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio

Q: What does Mazak parameter N37 do?

N37 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational speed after multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio. Set the rotational speed of the rotary axis so that the number of rotations of the ball screw per rotation of the rotary axis (360 degrees/actual ball screw pitch) will not be a decimal fraction.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the rotational speed of the rotary axis so that the number of rotations of the ball screw per rotation of the rotary axis (360 degrees/actual ball screw pitch) will not be a decimal fraction.

Setting

Setting range–32768 to 32767

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 82, 530. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →