What is the setting range of Mazak parameter N60?

0 to 10000 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · TIME CONST. (N)

N60

Real time tuning II Rapid feed time constant, minimum value

Q: What does Mazak parameter N60 do?

N60 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Real time tuning II Rapid feed time constant, minimum value. Real time tuning II Rapid feed time constant, minimum value The optimum time constant is calculated from the estimated inertia ratio by setting the maximum and minimum values for the rapid feed time constant and inertia ratio. Rapid feed time constant N57 N60

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Real time tuning II Rapid feed time constant, minimum value The optimum time constant is calculated from the estimated inertia ratio by setting the maximum and minimum values for the rapid feed time constant and inertia ratio. Rapid feed time constant N57 N60

Setting

Setting range0 to 10000

Unitms

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 82, 531. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →