What is the setting range of Mazak parameter N63?

0 to 10000 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · TIME CONST. (N)

N63

Real time tuning II Rapid feed time constant, range of change

Q: What does Mazak parameter N63 do?

N63 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Real time tuning II Rapid feed time constant, range of change. The current time constant is used if the difference between the optimum time constant and current time constant is equivalent to or smaller than the value set for N63, and the optimum time constant is used if the difference is greater than the value set for N63.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The current time constant is used if the difference between the optimum time constant and current time constant is equivalent to or smaller than the value set for N63, and the optimum time constant is used if the difference is greater than the value set for N63.

Setting

Setting range0 to 10000

Unitms

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 82, 532. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →