What is the setting range of Mazak parameter N8?

1 to 60000 (unit: mm/min (°/min)). A changed value takes effect: After stop of movement.

PARAMMachine parameter · TIME CONST. (N)

Creeping speed during initial zero-point return

Q: What does Mazak parameter N8 do?

N8 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Creeping speed during initial zero-point return. The feed rate at which each axis is moved back to the zero-point (reference point) after the zero-point watchdog LS (limit switch) has turned on in the initial operation after power-on. Feedrate M2

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The feed rate at which each axis is moved back to the zero-point (reference point) after the zero-point watchdog LS (limit switch) has turned on in the initial operation after power-on. Feedrate M2

Setting

Setting range1 to 60000

Unitmm/min (°/min)

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 81, 524. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →