What is the setting range of Mazak parameter S10?

0 to ±99999999 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S10

Axis of rotation of the tilting table

Q: What does Mazak parameter S10 do?

S10 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Axis of rotation of the tilting table. Specify the axis of rotation of the tilting table in machine coordinates (Y and Z). This parameter is used for the software travel limit function. Note : X-axial data are not required. (For machines equipped with a tilting table)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the axis of rotation of the tilting table in machine coordinates (Y and Z). This parameter is used for the software travel limit function. Note : X-axial data are not required. (For machines equipped with a tilting table)

Setting

Setting range0 to ±99999999

Unit0.0001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 535. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →