What is the setting range of Mazak parameter S11?

0 to 99999999 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S11

Corner position of the tilting table

Q: What does Mazak parameter S11 do?

S11 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Corner position of the tilting table. Specify the corner position of the tilting table in (Y- and Z-axial) distances from its axis of rotation. This parameter is used for the software travel limit function. Note : X-axial data are not required. (For machines equipped with a tilting table)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the corner position of the tilting table in (Y- and Z-axial) distances from its axis of rotation. This parameter is used for the software travel limit function. Note : X-axial data are not required. (For machines equipped with a tilting table)

Setting

Setting range0 to 99999999

Unit0.0001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 536. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →