What is the setting range of Mazak parameter S12?

0 to ±99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S12

Axis of rotation of the tilting table (Used for the automatic program origin calculation function)

Q: What does Mazak parameter S12 do?

S12 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Axis of rotation of the tilting table (Used for the automatic program origin calculation function). Specify the axis of rotation of the tilting table in machine coordinates (Y and Z). Use this parameter to execute the automatic program origin calculation function (option). Measure and enter data for respective machines. Note : X-axial data are not required. (For machines equipped with a tilting table)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the axis of rotation of the tilting table in machine coordinates (Y and Z). Use this parameter to execute the automatic program origin calculation function (option). Measure and enter data for respective machines. Note : X-axial data are not required. (For machines equipped with a tilting table)

Setting

Setting range0 to ±99999999

Unit0.001 mm/0.0001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 536. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →