What is the setting range of Mazak parameter S22?

1 to 200000 (unit: mm/min (°/min)). A changed value takes effect: After stop of movement.

PARAMMachine parameter · ANOTHER (S)

S22

Cutting feed clamping speed during tool tip point control

Q: What does Mazak parameter S22 do?

S22 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Cutting feed clamping speed during tool tip point control. Specify the critical cutting feed rate to be used during tool tip point control. During tool tip point control, speed is clamped in accordance with parameter S22 or M3 (critical cutting feed rate), whichever is the smaller.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the critical cutting feed rate to be used during tool tip point control. During tool tip point control, speed is clamped in accordance with parameter S22 or M3 (critical cutting feed rate), whichever is the smaller.

Setting

Setting range1 to 200000

Unitmm/min (°/min)

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 538. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →