What is the setting range of Mazak parameter S23?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: After stop of movement.

PARAMMachine parameter · ANOTHER (S)

S23

Reference workpiece zero point

Q: What does Mazak parameter S23 do?

S23 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Reference workpiece zero point. Set the position of a reference workpiece zero point for each axis in the machine coordinate system. Set the position of a reference workpiece zero point relating to the turret also in the machine coordinate system. For machining centers, this parameter is invalid. * Tool set value is determined based on this parameter.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the position of a reference workpiece zero point for each axis in the machine coordinate system. Set the position of a reference workpiece zero point relating to the turret also in the machine coordinate system. For machining centers, this parameter is invalid. * Tool set value is determined based on this parameter.

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 539. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →