What is the setting range of Mazak parameter S25?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S25

Central position on the upper surface of the tilt table (VARIAXIS) Central position of table upper surface (other machining centers)

Q: What does Mazak parameter S25 do?

S25 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Central position on the upper surface of the tilt table (for machines with a tilt table) Central position on the table upper surface (for other machining centers). Set the central position of the tilt table upper surface on the VIRTUAL MACHINING display in terms of machine coordinates for each axis. (For machines with a tilt table) Set the central position of the table upper surface on the VIRTUAL MACHINING display in terms of machine coordinates for each axis. S25 (Z) S25 (Z)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Central position on the upper surface of the tilt table (for machines with a tilt table) Central position on the table upper surface (for other machining centers)

Set the central position of the tilt table upper surface on the VIRTUAL MACHINING display in terms of machine coordinates for each axis. (For machines with a tilt table) Set the central position of the table upper surface on the VIRTUAL MACHINING display in terms of machine coordinates for each axis. S25 (Z) S25 (Z)

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 539. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →