What is the setting range of Mazak parameter S31?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S31

Specification of the machine coordinates of the floating reference point

Q: What does Mazak parameter S31 do?

S31 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Specification of the machine coordinates of the floating reference point. Specify the machine coordinates of the floating reference point. Example : G30.1X10.Z10.; Entry of the above command returns the tool in rapid feed mode through the intermediate point (X10, Z10) to the floating reference point specified in this parameter.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the machine coordinates of the floating reference point. Example : G30.1X10.Z10.; Entry of the above command returns the tool in rapid feed mode through the intermediate point (X10, Z10) to the floating reference point specified in this parameter.

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 541. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →