What is the setting range of Mazak parameter S35?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: At power on.

PARAMMachine parameter · ANOTHER (S)

S35

Rotational center of the second table

Q: What does Mazak parameter S35 do?

S35 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational center of the second table. Set the position of the rotational center of the second table in the machine coordinate system when table selection is valid. (That of the first table to be specified in parameter S5) Table having a horizontally rotational axis Z Y Table having a vertically rotational axis Z Y Note : Among the rotary axes (parameter M17 bit 4 = 1) excluding the rotary head, the first axis is regarded as the first rotary table and the second axis the second rotary table.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the position of the rotational center of the second table in the machine coordinate system when table selection is valid. (That of the first table to be specified in parameter S5) Table having a horizontally rotational axis Z Y Table having a vertically rotational axis Z Y Note : Among the rotary axes (parameter M17 bit 4 = 1) excluding the rotary head, the first axis is regarded as the first rotary table and the second axis the second rotary table.

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 542. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →