PARAMMachine parameter · ANOTHER (S)
S36
Position of the center of the second additional table on the VIRTUAL MACHINING display
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Position of the center of the second additional table on the VIRTUAL MACHINING display
Set the central position of the second additional table in the machine coordinate system on the VIRTUAL MACHINING display when the table selection function is valid. (Set the first additional table at parameter S25.) For the table having the horizontal axis of rotation Z For the table having the vertical axis of rotation Z Note : Among the rotary axes (parameter M17 bit 4 = 1) excluding the rotary head, the first axis is regarded as the first rotary table and the second axis the second rotary table.
Setting
Setting range0 to ±99999999
Unit0.0001 mm/0.00001 in
Program typeM, E
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 543. Reference and explanation only — not a reproduction of the manual.