What is the setting range of Mazak parameter S39?

0 to 8. A changed value takes effect: At power on.

PARAMMachine parameter · ANOTHER (S)

S39

Turning spindle number of the table control mechanism that features switching of servo C-axis and turning spindle

Q: What does Mazak parameter S39 do?

S39 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Turning spindle number of the table control mechanism that features switching of servo C-axis and turning spindle. Set the turning spindle number of the table control mechanism that features switching of servo C-axis and turning spindle. 0: Specification not supported or the spindle C-axis specification 1 to 8: Spindle number

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the turning spindle number of the table control mechanism that features switching of servo C-axis and turning spindle. 0: Specification not supported or the spindle C-axis specification 1 to 8: Spindle number

Setting

Setting range0 to 8

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 544. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →