What does Mazak parameter S4 do?

S4 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed forward gain. Set for each axis the feed forward gain for acceleration/deceleration before interpolation.

What is the setting range of Mazak parameter S4?

0 to 100 (unit: %). A changed value takes effect: Immediate.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · ANOTHER (S)

Feed forward gain

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Feed forward gain

Set for each axis the feed forward gain for acceleration/deceleration before interpolation.

Setting

Setting range0 to 100

Unit%

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 534. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →