What is the setting range of Mazak parameter S40?

–3599999 to 3599999 (unit: 0.0001°). A changed value takes effect: At power on.

PARAMMachine parameter · ANOTHER (S)

S40

Offset amount from the turning spindle 0position to the servo C-axis machine zero point

Q: What does Mazak parameter S40 do?

S40 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Offset amount from the turning spindle 0°position to the servo C-axis machine zero point. Set the offset amount from the turning spindle 0°position to the servo C-axis machine zero point for the table control mechanism that features switching of servo C-axis and turning spindle.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Offset amount from the turning spindle 0°position to the servo C-axis machine zero point

Set the offset amount from the turning spindle 0°position to the servo C-axis machine zero point for the table control mechanism that features switching of servo C-axis and turning spindle.

Setting

Setting range–3599999 to 3599999

Unit0.0001°

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 544. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →