‹ALARMSMazatrol Assistant
PARAMMachine parameter · ANOTHER (S)
S45

ANOTHER bit settings (3 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — S45 is set bit by bit
  1. bit 0

    Non-target axis setting for indexing unit (rotational axis)

    Non-target axis setting for indexing unit (rotational axis) Set the axis of which setting check or rotation command is not output in the indexing unit. * Rotational axis: the axis specified in parameter M17 bit 4 = 1 0: Target axis 1: Non-target axis Note : This is invalid for rotational axes of the sixth or higher. When parameter BA48 = 0 and L21 = 0, this is invalid for rotational axes of the fifth or higher.

    Range 0, 1 · Takes effect: Immediate

  2. bit 1

    Setting of an axis not displayed on the counter

    Set an axis that is not displayed on the counter. 0 : Displayed 1 : Hidden

    Range 0, 1 · Takes effect: Immediate

  3. bit 2

    Rapid feed overlapping function disabled axis

    Sets the disable axis for the rapid feed overlapping function. 0: Rapid feed overlapping function enabled axis 1: Rapid feed overlapping function disabled axis * When bit 2 of S45 is set to “1”, the settings of S49 and S50 will be ignored. S49 : Rapid feed overlapping function: G0 in-position width S50 : Rapid feed overlapping function: G1 in-position width

    Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 544, 545. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →