What is the setting range of Mazak parameter S49?

0 to 10000000. A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S49

Rapid feed overlapping function: G0 in-position width

Q: What does Mazak parameter S49 do?

S49 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Rapid feed overlapping function: G0 in-position width. Set the G0 in-position width to be used when the rapid feed overlapping function is valid. If a value outside the setting range is set, operation is carried out with the upper limit value (10000000) or lower limit value (0).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the G0 in-position width to be used when the rapid feed overlapping function is valid. If a value outside the setting range is set, operation is carried out with the upper limit value (10000000) or lower limit value (0).

Setting

Setting range0 to 10000000

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 545. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →