What is the setting range of Mazak parameter S5?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: At power on.

PARAMMachine parameter · ANOTHER (S)

Rotational center of the table

Q: What does Mazak parameter S5 do?

S5 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational center of the table. Set the position of the rotational center of the table in the machine coordinates system. Note : 1. Z-axis data are not required for a machine with a tilting table. 2. This parameter is used to execute the automatic program origin calculation function (option) for a machine with a tilting table. (For machines equipped with a tilting table)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the position of the rotational center of the table in the machine coordinates system. Note : 1. Z-axis data are not required for a machine with a tilting table. 2. This parameter is used to execute the automatic program origin calculation function (option) for a machine with a tilting table. (For machines equipped with a tilting table)

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 534. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →