What is the setting range of Mazak parameter S51?

0 to 99999999 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S51

Distance to the small-diameter table

Q: What does Mazak parameter S51 do?

S51 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Distance to the edge of the small-diameter table. Sets the distance from the center of rotation to the edge of the small-diameter table for VARIAXIS. Even if a value is set for the axis parallel to the rotary axis of the tilt table, the value is not used for the software limit check. When 0 is set, the small-diameter table is not taken into consideration. [Related parameters] S11 (Function dedicated to machines equipped with the tilt table)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Distance to the edge of the small-diameter table

Sets the distance from the center of rotation to the edge of the small-diameter table for VARIAXIS. Even if a value is set for the axis parallel to the rotary axis of the tilt table, the value is not used for the software limit check. When 0 is set, the small-diameter table is not taken into consideration. [Related parameters] S11 (Function dedicated to machines equipped with the tilt table)

Setting

Setting range0 to 99999999

Unit0.0001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 546. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →