What is the setting range of Mazak parameter S53?

0 to 10000000. A changed value takes effect: Immediate.

PARAMMachine parameter · ANOTHER (S)

S53

Rapid feed overlap function G1 in-position width (for tool tip point control and cutting point command)

Q: What does Mazak parameter S53 do?

S53 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Rapid feed overlap function G1 in-position width (for tool tip point control and cutting point command). Sets the in-position width for rapid feed overlapping at joints between consecutively specified G00 and G01 or G01 and G00 in the tool tip point control or cutting point command mode. If a value outside the setting range is set, operation is carried out with the upper limit value (10000000) or lower limit value (0). When 0 is set, the value set for S50 (Rapid feed overlapping function: G1 in-position width) is used. [Related parameters] S50

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the in-position width for rapid feed overlapping at joints between consecutively specified G00 and G01 or G01 and G00 in the tool tip point control or cutting point command mode. If a value outside the setting range is set, operation is carried out with the upper limit value (10000000) or lower limit value (0). When 0 is set, the value set for S50 (Rapid feed overlapping function: G1 in-position width) is used. [Related parameters] S50

Setting

Setting range0 to 10000000

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 546. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →