What is the setting range of Mazak parameter S7?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: At power on.

PARAMMachine parameter · ANOTHER (S)

Upper limit (on Z-axis) of machining range for table rotating machining 

Q: What does Mazak parameter S7 do?

S7 is a Machine parameter in the ANOTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Upper limit (on Z-axis) of machining range for table rotating machining . This parameter specifies the range of rotating machining for the table rotating machining  (X-B machining). Set the upper limit (on Z-axis) of the machining range in the machine coordinates system. The machine recognizes that it is prohibited to move beyond this limit in the negative direction.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter specifies the range of rotating machining for the table rotating machining  (X-B machining). Set the upper limit (on Z-axis) of the machining range in the machine coordinates system. The machine recognizes that it is prohibited to move beyond this limit in the negative direction.

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 83, 535. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →