What is the setting range of Mazak parameter SA107-SA113?

0 to 99999999 (unit: 0.01 kW). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA107-SA113

Rotational speed in the following spindle output diagrams at continuous rating:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION

Q: What does Mazak parameter SA107-SA113 do?

SA107-SA113 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational speed in the following spindle output diagrams at continuous rating:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION. Cross axis: speed Vertical axis: output Point Note : 1. Set values for spindle output diagrams at continuous rating. 2. This parameter is valid for models that allow you to switch between load meter ratings on the POSITION display.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Cross axis: speed Vertical axis: output Point Note : 1. Set values for spindle output diagrams at continuous rating. 2. This parameter is valid for models that allow you to switch between load meter ratings on the POSITION display.

Setting

Setting range0 to 99999999

Unit0.01 kW

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 563. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →