What is the setting range of Mazak parameter SA114?

0 to 999999. A changed value takes effect: After stop of movement.

PARAMMachine parameter · SPINDLE (SA)

SA114

Spindle speed supervisory mode 2 for safety supervision

Q: What does Mazak parameter SA114 do?

SA114 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle speed supervisory mode 2 for safety supervision. Set the spindle speed to be monitored in safety supervisory mode 2. If the operating speed of the spindle exceeds the set value in safety supervisory mode 2, this will cause a safety supervisory alarm and bring the machine to an emergency stop.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the spindle speed to be monitored in safety supervisory mode 2. If the operating speed of the spindle exceeds the set value in safety supervisory mode 2, this will cause a safety supervisory alarm and bring the machine to an emergency stop.

Setting

Setting range0 to 999999

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 87, 563. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →