What is the setting range of Mazak parameter SA116?

0 to 999999 (unit: min–1). A changed value takes effect: After stop of movement.

PARAMMachine parameter · SPINDLE (SA)

SA116

Spindle safety clamping mode 2 for safety supervision

Q: What does Mazak parameter SA116 do?

SA116 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle safety clamping mode 2 for safety supervision. Set the spindle safety clamping speed to be monitored in safety supervisory mode 2. In safety supervisory mode 2 and while a safety clamping request is in effect, the spindle is decelerated to the set speed. Assign a value smaller than the speed value to be monitored in mode 2 (i.e., specified in SA114).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the spindle safety clamping speed to be monitored in safety supervisory mode 2. In safety supervisory mode 2 and while a safety clamping request is in effect, the spindle is decelerated to the set speed. Assign a value smaller than the speed value to be monitored in mode 2 (i.e., specified in SA114).

Setting

Setting range0 to 999999

Unitmin–1

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 87, 564. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →