PARAMMachine parameter · SPINDLE (SA)
SA118
Selecting the spindle door of the spindle whose speed is to be monitored
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Selecting the spindle door of the spindle whose speed is to be monitored
Select the door group to which the spindle belongs in safety supervisory mode. If SP129: SFNC9/bit F is OFF, speed monitoring will not be conducted, irrespective of the setting of this parameter. [Examples of setting] 0000: The spindle does not belong to any door. 0001: The spindle belongs to the door-1 group. 0002: The spindle belongs to the door-2 group. 0003: The spindle belongs to the door-1/2 group.
Setting
Setting range—
Unit—
Program typeM, E
Takes effectAfter stop of movement
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 87, 564. Reference and explanation only — not a reproduction of the manual.