PARAMMachine parameter · SPINDLE (SA)
SA119
Deceleration judgment coefficient on safety speed clamping of the spindle to be supervised for safety
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Deceleration judgment coefficient on safety speed clamping of the spindle to be supervised for safety
For safety speed clamping in safety supervisory mode, when a claming request is input, a clamping signal will be output after the spindle has decelerated to a safety clamping speed. This parameter specifies to what additional percentage of the safety clamping speed the spindle is to be decelerated as the output timing of the speed clamping signal. If 0 is set, the speed clamping signal will be output when the spindle decelerates to a 10% additional speed (i.e., 110% of the safety clamping speed).
Setting
Setting range0 to 100
Unit%
Program typeM, E
Takes effectAfter stop of movement
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 87, 564. Reference and explanation only — not a reproduction of the manual.