What is the setting range of Mazak parameter SA131?

0 to 65535 (unit: 0.1 Hz). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA131

#2 notch filter frequency for cutting-load detection pecking cycle

Q: What does Mazak parameter SA131 do?

SA131 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Notch filter frequency for cutting-load detection pecking cycle SA129: #1 notch filter frequency SA131: #2 notch filter frequency. Set the notch filter frequency for the cutting-load detection pecking cycle.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Notch filter frequency for cutting-load detection pecking cycle SA129: #1 notch filter frequency SA131: #2 notch filter frequency

Set the notch filter frequency for the cutting-load detection pecking cycle.

Setting

Setting range0 to 65535

Unit0.1 Hz

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 565. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →