What is the setting range of Mazak parameter SA133?

0 to 65535 (unit: 0.01 Nm). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA133

Breakage detection torque for cutting-load detection pecking cycle

Q: What does Mazak parameter SA133 do?

SA133 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Breakage detection torque for cutting-load detection pecking cycle. Set the detection torque to be used when the breakage detection distance (l) is specified for the cutting-load detection pecking cycle.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the detection torque to be used when the breakage detection distance (l) is specified for the cutting-load detection pecking cycle.

Setting

Setting range0 to 65535

Unit0.01 Nm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 566. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →