What is the setting range of Mazak parameter SA134?

0 to 999999. A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA134

Maximum spindle orientation speed

Q: What does Mazak parameter SA134 do?

SA134 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum spindle orientation speed. Set the maximum spindle orientation speed. Note : 1. Some other functions (such as safety speed clamping control based on a PLC ladder) may cause the spindle orientation speed to be clamped at a speed lower than the setting of this parameter. 2. Immediately after power-on, the Z-phase is detected, so the spindle is oriented at the maximum speed specified in parameter SA92, not SA134. 3. Clamping based on this parameter will be invalid if the setting is 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the maximum spindle orientation speed. Note : 1. Some other functions (such as safety speed clamping control based on a PLC ladder) may cause the spindle orientation speed to be clamped at a speed lower than the setting of this parameter. 2. Immediately after power-on, the Z-phase is detected, so the spindle is oriented at the maximum speed specified in parameter SA92, not SA134. 3. Clamping based on this parameter will be invalid if the setting is 0.

Setting

Setting range0 to 999999

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 566. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →