What is the setting range of Mazak parameter SA135?

0 to 999999. A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA135

Rotational speed change width while override variable thread cutting is valid

Q: What does Mazak parameter SA135 do?

SA135 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational speed change width while override variable thread cutting is valid. When override variable thread cutting is valid, acceleration/deceleration is controlled according to the override variable time constant (SA98) and the gradient set by this parameter. Spindle speed * Set the value that is adjusted to the machine specification when the override variable thread cutting option is provided. When this parameter is set to 0, it is regarded as 65000.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

When override variable thread cutting is valid, acceleration/deceleration is controlled according to the override variable time constant (SA98) and the gradient set by this parameter. Spindle speed * Set the value that is adjusted to the machine specification when the override variable thread cutting option is provided. When this parameter is set to 0, it is regarded as 65000.

Setting

Setting range0 to 999999

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 566. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →