What is the setting range of Mazak parameter SA136?

0 to 255. A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA136

Selection of signal input door on the safety monitor drive side (spindle)

Q: What does Mazak parameter SA136 do?

SA136 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of a door for signal input on the drive side (spindle) in safety supervisory mode. Set which door signal is input for the axis with door signal input on the drive side (spindle) in safety supervisory mode. 1: Door 1 signal 2: Door 2 signal 4: Door 3 signal 8: Door 4 signal

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Selection of a door for signal input on the drive side (spindle) in safety supervisory mode

Set which door signal is input for the axis with door signal input on the drive side (spindle) in safety supervisory mode. 1: Door 1 signal 2: Door 2 signal 4: Door 3 signal 8: Door 4 signal

Setting

Setting range0 to 255

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 566. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →