What does Mazak parameter SA140 do?

SA140 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Turret indexing gear ratio at the motor side. Sets the turret indexing gear ratio at the motor side.

What is the setting range of Mazak parameter SA140?

1 to 199. A changed value takes effect: After stop of movement.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · SPINDLE (SA)

SA140

Turret indexing gear ratio at the motor side (only for MULTIPLEX)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Turret indexing gear ratio at the motor side

Sets the turret indexing gear ratio at the motor side.

Setting

Setting range1 to 199

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 567. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →