‹ALARMSMazatrol Assistant
PARAMMachine parameter · SPINDLE (SA)
SA144

SPINDLE bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — SA144 is set bit by bit
  1. bit 0

    Spindle winding coil selection function while override variable thread cutting is valid

    0: Invalid 1: Valid

    Range 0, 1 · Takes effect: Immediate

  2. bit 1

    Spindle winding coil selection while override variable thread cutting is valid

    0: H winding coil 1: L winding coil * This parameter is valid when bit 0 of parameter is set to 1.

    Range 0, 1 · Takes effect: Immediate

  3. bit 3

    Warning check for alarm 67 HI-SPEED SYNCTAP AXIS ALARM (for spindle C-axis)

    0: Include 1: Do not include

    Range 0, 1 · Takes effect: Immediate

  4. bit 4

    Positive threading spindle rotational direction and encoder polarity

    0: Spindle cycle counter increase 1: Spindle cycle counter decrease

    Range 0, 1 · Takes effect: Immediate

  5. bit 5

    Gear conversion during spindle rotation valid

    Range 0, 1 · Takes effect: Immediate

  6. bit 6

    Spindle gear changeover valid

    Range 0, 1 · Takes effect: Immediate

  7. bit 7

    Turret indexing valid

    Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 88, 89, 569, 570, 571. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →