What is the setting range of Mazak parameter SA17-SA24?

0 to 999999. A changed value takes effect: At power on.

PARAMMachine parameter · SPINDLE (SA)

SA17-SA24

Maximum spindle speed during tapping cycle (range 1 to 8)

Q: What does Mazak parameter SA17-SA24 do?

SA17-SA24 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum spindle speed during tapping cycle (range 1 to 8). The maximum number of revolutions per minute of the spindle in each speed range during a tapping cycle

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The maximum number of revolutions per minute of the spindle in each speed range during a tapping cycle

Setting

Setting range0 to 999999

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 548. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →