What is the setting range of Mazak parameter SA227?

0 to 99999999 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA227

Hobbing II (position controlled hobbing), Time constant 1 for quasi constant inclination control

Q: What does Mazak parameter SA227 do?

SA227 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 1 to 3 for quasi constant inclination control. Sets the spindle speed limit for selecting a time constant dedicated to quasi constant inclination control in hobbing II (position controlled hobbing), and the value for the time constant. *1 This parameter is valid only when K259 bit 1 = 1. *2 When all of parameters to are 0, parameters SA81 to SA86 are used.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 1 to 3 for quasi constant inclination control

Sets the spindle speed limit for selecting a time constant dedicated to quasi constant inclination control in hobbing II (position controlled hobbing), and the value for the time constant. *1 This parameter is valid only when K259 bit 1 = 1. *2 When all of parameters to are 0, parameters SA81 to SA86 are used.

Setting

Setting range0 to 99999999

Unitms

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 89, 571. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →