What is the setting range of Mazak parameter SA231?

0 to 999. A changed value takes effect: At power on.

PARAMMachine parameter · SPINDLE (SA)

SA231

Spindle speed fluctuation function M code number for enabling the spindle speed fluctuation synchronous mode

Q: What does Mazak parameter SA231 do?

SA231 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle speed fluctuation function M code number for enabling the spindle speed fluctuation synchronous mode. Sets the M code number for enabling the spindle speed fluctuation synchronous mode for the spindle speed fluctuation function.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the M code number for enabling the spindle speed fluctuation synchronous mode for the spindle speed fluctuation function.

Setting

Setting range0 to 999

Unit—

Program typeE

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 89, 572. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →