What does Mazak parameter SA243 do?

SA243 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). 2 bit settings.

Which bits does Mazak parameter SA243 have?

Bit 0: INTELLIGENT BALANCE ANALYZER function (IBA): Measured data rotation direction Bit 1: Smart safety monitoring alarm (for spindle)

‹ALARMSMazatrol Assistant

PARAMMachine parameter · SPINDLE (SA)

SA243

SPINDLE bit settings (2 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — SA243 is set bit by bit

bit 0
INTELLIGENT BALANCE ANALYZER function (IBA): Measured data rotation direction
Set the rotating direction of the measured data. 0: Forward 1: Reverse
Range 0, 1 · Takes effect: Immediate
bit 1
Smart safety monitoring alarm (for spindle)

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 89, 573. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →