What does Mazak parameter SA25-SA28 do?

SA25-SA28 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle speed during gear shifting (range 1 to 4). The number of revolutions per minute of the spindle during shifting of gears thru the various ranges

What is the setting range of Mazak parameter SA25-SA28?

0 to 999999 (unit: min–1). A changed value takes effect: At power on.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · SPINDLE (SA)

SA25-SA28

Spindle speed during gear shifting (range 1 to 4)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The number of revolutions per minute of the spindle during shifting of gears thru the various ranges

Setting

Setting range0 to 999999

Unitmin–1

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 84, 549. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →