What is the setting range of Mazak parameter SA31?

0 to 100 (unit: %). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA31

Load meter reference output scaling factor (low-speed coil)

Q: What does Mazak parameter SA31 do?

SA31 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Load meter reference output scaling factor (low-speed coil). Scaling factor (for low-speed coil) with respect to the reference output of the load meter Output SA31 = P1/P0 × 100 (min–1) SA32 = N1

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Scaling factor (for low-speed coil) with respect to the reference output of the load meter Output SA31 = P1/P0 × 100 (min–1) SA32 = N1

Setting

Setting range0 to 100

Unit%

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 549. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →