What is the setting range of Mazak parameter SA32?

0 to 999999 (unit: min–1). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA32

Load meter reference output base rotational speed (low-speed coil)

Q: What does Mazak parameter SA32 do?

SA32 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Load meter reference output base rotational speed (low-speed coil). Base rotational speed (for low-speed coil) for the output changed by the parameter SA31 with respect to the reference output of the load meter Output SA31 = P1/P0 × 100 SA32 = N1

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Base rotational speed (for low-speed coil) for the output changed by the parameter SA31 with respect to the reference output of the load meter Output SA31 = P1/P0 × 100 SA32 = N1

Setting

Setting range0 to 999999

Unitmin–1

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 85, 550. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →