What is the setting range of Mazak parameter SA33-SA40?

0 to 1800 (unit: ms). A changed value takes effect: After stop of movement.

PARAMMachine parameter · SPINDLE (SA)

SA33-SA40

Acceleration/deceleration time constant for the synchronous tapping (range 1 to 8)

Q: What does Mazak parameter SA33-SA40 do?

SA33-SA40 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Acceleration/deceleration time constant for the synchronous tapping (range 1 to 8). Linear acceleration/deceleration time constant for the synchronous tapping cycle SA33: Range 1 SA34: Range 2 SA35: Range 3 SA36: Range 4

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Linear acceleration/deceleration time constant for the synchronous tapping cycle SA33: Range 1 SA34: Range 2 SA35: Range 3 SA36: Range 4

Setting

Setting range0 to 1800

Unitms

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 85, 550. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →