What does Mazak parameter SA41 do?

SA41 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle orientating speed. Specify the spindle orientating speed.

What is the setting range of Mazak parameter SA41?

0 to 999999 (unit: min–1). A changed value takes effect: At power on.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · SPINDLE (SA)

SA41

Spindle orientating speed

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the spindle orientating speed.

Setting

Setting range0 to 999999

Unitmin–1

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 85, 550. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →