What does Mazak parameter SA46 do?

SA46 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

What is the setting range of Mazak parameter SA46?

Binary, eight digits. A changed value takes effect: After stop of movement.

Which bits does Mazak parameter SA46 have?

Bit 0: Direction of orientation Bit 1: Direction of orientation Bit 2: C-axis position control changeover type Bit 3: Synchronous tapping position control changeover type Bit 4: Z-phase detection direction Bit 5: C-axis homing direction Bit 6: C-axis homing direction Bit 7: Synchronous tapping command polarity

‹ALARMSMazatrol Assistant

PARAMMachine parameter · SPINDLE (SA)

SA46

SPINDLE bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — SA46 is set bit by bit

bit 0
Direction of orientation
Takes effect: After stop of movement
bit 1
Direction of orientation
Takes effect: After stop of movement
bit 2
C-axis position control changeover type
Takes effect: After stop of movement
bit 3
Synchronous tapping position control changeover type
Takes effect: After stop of movement
bit 4
Z-phase detection direction
Takes effect: After stop of movement
bit 5
C-axis homing direction
Takes effect: After stop of movement
bit 6
C-axis homing direction
Takes effect: After stop of movement
bit 7
Synchronous tapping command polarity
Takes effect: After stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 85, 553. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →