What is the setting range of Mazak parameter SA48?

0 to 2. A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA48

Encoder signal input destination

Q: What does Mazak parameter SA48 do?

SA48 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Encoder signal input destination. Specify the encoder signal input destination. 0: Via the HDLC-connected axis (Spindle AMP feedback data) 1: Direct connection to encoder 1 (ENC1) 2: Direct connection to encoder 2 (ENC2)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the encoder signal input destination. 0: Via the HDLC-connected axis (Spindle AMP feedback data) 1: Direct connection to encoder 1 (ENC1) 2: Direct connection to encoder 2 (ENC2)

Setting

Setting range0 to 2

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 86, 554. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →