What is the setting range of Mazak parameter SA50?

0 to 8. A changed value takes effect: At power on.

PARAMMachine parameter · SPINDLE (SA)

SA50

Spindle type

Q: What does Mazak parameter SA50 do?

SA50 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle type. Specify the type of spindle corresponding to the displayed SA parameters, by the appropriate numeric value. 0: Axis not specified 1: No. 1 milling spindle 2: No. 1 turning spindle 3: No. 2 milling spindle 4: No. 2 turning spindle 5: No. 3 milling spindle 6: No. 3 turning spindle 7: No. 4 milling spindle 8: No. 4 turning spindle

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Spindle type

Specify the type of spindle corresponding to the displayed SA parameters, by the appropriate numeric value. 0: Axis not specified 1: No. 1 milling spindle 2: No. 1 turning spindle 3: No. 2 milling spindle 4: No. 2 turning spindle 5: No. 3 milling spindle 6: No. 3 turning spindle 7: No. 4 milling spindle 8: No. 4 turning spindle

Setting

Setting range0 to 8

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 86, 554. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →