What is the setting range of Mazak parameter SA51?

0 to 8. A changed value takes effect: At power on.

PARAMMachine parameter · SPINDLE (SA)

SA51

Number of gears on spindle

Q: What does Mazak parameter SA51 do?

SA51 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of gears on spindle. Set the number of gears on the spindle. 1. For displaying [GEAR SELECT] in the manual operation mode 0, 5 to 8: Without gear 1: 2 gear positions (without neutral) 2: 2 gear positions (with neutral) 3: 3 gear positions (with neutral) 4: 4 gear positions (with neutral) 2. For automatic gear selection with the MAZATROL program (only for milling spindle)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the number of gears on the spindle. 1. For displaying [GEAR SELECT] in the manual operation mode 0, 5 to 8: Without gear 1: 2 gear positions (without neutral) 2: 2 gear positions (with neutral) 3: 3 gear positions (with neutral) 4: 4 gear positions (with neutral) 2. For automatic gear selection with the MAZATROL program (only for milling spindle)

Setting

Setting range0 to 8

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 86, 554. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →