What is the setting range of Mazak parameter SA65?

0 to 65535 (unit: 3.5 ms). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA65

Cutting force calculation filter for auto-pecking of the cutting load detection type

Q: What does Mazak parameter SA65 do?

SA65 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Cutting force calculation filter for auto-pecking of the cutting load detection type. Set the filter for the data which has been sampled at 3.5-ms intervals. If the entered value is “0”, the data actually used will be 4 × 3.5 (ms).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the filter for the data which has been sampled at 3.5-ms intervals. If the entered value is “0”, the data actually used will be 4 × 3.5 (ms).

Setting

Setting range0 to 65535

Unit3.5 ms

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 86, 559. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →